Soil particle size – Grain size analysis of soils, classifications are done to find their engineering properties. construction materials for home construction.
These properties required for evaluation of suitability of the soil, for use a foundation or construction materials for home construction.
Soil particle size Classification
This classification of soil is based on the grain size of particles.
The engineering behaviour of soil with small particles will differ from the soil with large particles.
In many types and varieties, natural soils occur
The soils are grouped into 2 categories for engineering purposes.
1.Coarse-grained Soils
2.Fine-grained soils
1. Coarse-grained soils:
Gravels and Sand are examples of coarse-grained soils.
Relative density and soil particle size are the main index properties of coarse-grained soils.
The soil Particle size of Gravel
a.Fine gravel : 4.75mm to 20mm
b.Coarse gravel: 20mm to 80mm
c.Cobble: 80mm to 300mm
d.Boulder: > 300mm.
Soil Particle sizes of Sand:
a.Fine sand: 0.075 mm to 0.425mm
b.Medium sand : 0.425mm to 2mm
c.Coarse sand : 2mm to 4.75mm.
2. Fine-grained soils:
Silt and Clay are examples of fine-grained soils.
Consistency and Atterbergs’s limits are the main index properties of fine-grained soils are
Soil Particle size of Silt
a.Silt – 0.002 to 0.075mm
The soil particle size of Clay
a. Clay – </=0.002mm
3 Classification types of soil
The following are the 3 classification types of soil.
- ASSHTO Classification
- UCS classification
- ICS classification
Need for Classification
For understanding the nature, the items group.
Classification attempts to choose those criteria which are relevant to the purpose of view.
The soils that are grouped in order of performance for one type of physical conditions will not necessarily have the same order of performance under different physical conditions
Index Properties
The soils are classified and identified based on Index properties.
The properties of soils which are not of primary interest to the geotechnical engineer, but which are indicative of the engineering properties are called Index properties.
Given below are the Engineering properties:
1.Permeability
Permeability of soil is the property of soil mass which permits the flow of water through its interconnected voids.
2.Shear strength
Shear strength is the resistance to shearing stresses just before failure.
3.Consolidation.
Consolidation is defined as the compression of soil under steady pressure, such as the weight imposed by a structure or earth filling.
Categories of Index properties
The Index properties are divided into two categories:
1. Properties of individual soil particle size.
2.Aggregate properties. (properties of soil mass)
1. Properties of individual soil particle size:
Properties of individual particle size can be determined for a disturbed sample & they depend upon the individual grains and are independent of the manner of soil formation.
2. Aggregate properties
Aggregate properties of soil depend on soil formation, soil history and soil structure and these properties can be determined from undisturbed samples or preferably from in situ tests.
Soil classification tests
Simple tests which are required to determine the Index properties are known as classification tests.
Soil classification tests are required for evaluation of suitability of the soil, for use a foundation or construction materials for home construction.
These classification tests are proved to be a very useful tool for the soil engineer as it gives guidelines of properties like permeability, compressibility and shear strength.
IS particle size classification
American Association of State Highways and Transport Officials (AASHTO) classifications
This classification is useful for classifying soils for highways.
The particle size and plasticity characteristics are required to classify this soil.
Soils classified like A1, A2, A3…….A7.
A1 group soils are Stone fragments, gravel and sand
A2 group soils are Silty or clayey gravel sand
A3 group soils are fine sand
A4, A5 group soils are silty soils
A6, A7 group soils are clayey soils.
A1, A2, A3 are excellent to good for subgrade.
A4,A5,A6,A6 are Fair to poor for subgrade.
Fine grade soils are the soils if 35% of soil passes through sieve no 200(0.075mm).
Sieve no 10(2mm size) is used to divide the soil into gravel and sand.
In this system, there is no place for organic soils
Unified Soil Classification system (UCS)
Casagrande in 1948 developed this system.
This system is used in all types of engineering problems involving soils.
The criteria in this classification :
a. Grain size distribution
b.Plasticity characteristics
c. Compressibility.
In this system, the soils are classified into 15 groups
If more than 50% soil passes through 0.075mm its is classified as fine-grained.
Sieve 475mm is used for dividing the soil into gravel and sand.
IS soil classification or Indian standard classification (ICS)
This system is similar to the UCS system with one basic difference in the classification of fine-grained soils.
The fine-grained soil in UCS is divided into 2 categories Low and high compressibility.
But in ICS system they are classified into three categories low, medium and high compressibility.
The code recommended for this system is IS 1498-1970.
According to code, the soils are divided into three divisions.
a.Coarse-grained soils (8 groups)
b.Fine-grained soils (9 groups)
c.Highly organic soils (1 group)
a. Coarse-grained Soils
Coarse-grained soil is the soils if more than 50% of soil retained on 0.075mm sieve.
They are two types:
I.Gravel (4 groups)
II. Sand (4 groups)
I. Gravel(G)
If more than 50% of coarse fraction retained on 4.75mm IS sieve then the coarse-grained soil is classified as gravel
They are 4 types of Gravels:
- Clayey gravel (GC)
- Poorly graded soil (GP)
- Well graded gravel (GW)
- Silty gravel (GM)
II. Sand
Coarse-grained soils classified as sand if more than 50% of coarse fraction passes on 4.75mm IS sieve.
Sands are of 4 types. They are.
- Well grade sand (SW)
- Poorly graded sand (SP)
- Silty sand (SM)
- Clayey sand (SC)
Coefficient of Uniformity (Cu)
The uniformity of soil is expressed by a term known as Uniformity of coefficient, Cu.
Cu=D60/D10
where, D60 – Particle size is such that 60% of the soil is finer than this size.
D10 – Particle size is such that 10% of soil is finer than this size.
& D10 is also called an effective size.
Given below Cu values for coarse-grained soil
1. Well graded gravel-GW, Cu>4
2. Poorly graded gravel-GP, Cu posses no values.
3. Well graded sand-SW, Cu>6
4. Poorly grade sand-SP, Cu posses no values.
Coefficient of Curvature (Cc)
The shapes of the particle size distribution is determined by the coefficient of curvature & that coefficient also termed as the coefficient of graduation.
Cc=(D30xD30)/(D60xD10)
where
D30 -Particle size is such that 30% of the soil is finer than this size.
Given below Cc values for coarse-grained soil
1. Cc posses no valves for poorly grade sand-SP,
2. Cc is between 1 and 3 for Well graded gravel-GW,
2. Cc posses no valves for Poorly graded gravel-GP,
3. Cc is between 1 and 3 for Well graded sand-SW,
b. Fine-grained soils
Soil is classified as fine-grained soil if more than 50% of soil passes through 0.075mm sieve.
The following are the types of fine-grained soils.
- Inorganic silts (M)
- Inorganic clays (C)
- Organic silts & clay (O)
Their types are further divided on the basis of the characteristics of compressibility :
1. Low compressible inorganic silt (ML)
2. Intermediate compressible inorganic silt (MI)
3. High compressible inorganic silt (MH)
4. Low compressible inorganic clay (CL)
5. Intermediate compressible inorganic clay (CI)
6. High compressible inorganic clay (CH)
7.High compressible organic clay and silt (OH)
8.Low compressible organic clay silt (OL)
9.Intermediate compressible organic clay and silt (OI)
Liquid Limit
The stages of water content at which the soil changes from the liquid state to the plastic state is called Liquid limit.
compressibility characteristics of the soil are expressed based on Liquid limit.
The clay practically behaves like a liquid but possesses a small shear strength, at the liquid limit,
On the amount of clay mineral, The liquid limit of soil depends.
The particle will be smaller, If the surface charge is stronger and
If the amount of adsorbed water is greater, the liquid limit will be higher.
If the liquid limit is
a. < than 35% it is called Low compressible
b. Between 35 % to 50 %, it is intermediate compressible
c. > than 50% ,it is high compressible.
Plasticity chart
Based on plasticity chart fined grained soils are classified which was first explained by Mr.Casagrande.
Plasticity chart equation can be addressed by Ip = (WL-20) x 0.73
For fine-grained soils plasticity chart analysis
1. Inorganic clays are plotted above A-line.
2. Inorganic silts are plotted below A-line.
3. Clays, Organic silts are plotted under A-line
4. Black cotton soils lie along with a band partly higher and partly under A-line.
Group Index of Soil (GI)
The soil Group index dependent on :
a. % of soil passing 0.075mm sieve.
b. Liquid limit
c. Plastic limit.
Group index can be calculated by GI=0.2a + 0.005ac + 0.01bd
where , a=(% soil passing 0.075mm sieve)-35% range (0 to 40)
b=(% soil passing 0.075mm sieve)-35% range (0 to 40)
c=Wl-40%(range 0 to 20),Wl is Liquid limit.
d=Ip-20% (Range 0 to 20),Ip is Plasticity Index.
if Group index valve is negative (-ve), it is recorded as 0 and Group index valves range from 0 to 20
if Group index =0, the soil is best for pavement and GI=20, the soil is poor for pavement.
Sedimentation Analysis
Silt and clay soil particles size cannot be separated by sieving., therefore sedimentation tests are preferred for fine-grained soils.
The common sedimentation test is:
a.Hydrometer test
b.Pipette test
Sedimentation analysis can be performed for determining soil particles less than 0.075mm size.
The sedimentation analysis is dependent on the Stroke’s law.
spherical particles terminal velocity is calculated by practising stoke’s law.
For particle diameters varying from 0.2 mm to 0.0002 mm, the Stroke’s law is proven.
particle size distribution in soil
Read more:
hello!,I like your writing so so much! share we keep in touch extra approximately
your article on AOL? I require a specialist on this house to solve my problem.
May be that is you! Looking forward to see you.
Way cool! Some very valid points! I appreciate you writing
this write-up and also the rest of the site is very good.
I think the admin of this website is genuinely working hard
for his site, since here every stuff is quality based
stuff.
I seriously love your site.. Excellent colors & theme. Did you
develop this amazing site yourself? Please reply back
as I’m planning to create my very own website and would like
to find out where you got this from or what the theme is called.
Cheers!
I have recently started a blog, the info you offer on this website has helped me tremendously. Thanks for all of your time & work.
An impressive share! I have just forwarded this onto a
colleague who had been doing a little homework on this.
And he actually ordered me breakfast due to the fact that I found it for him…
lol. So allow me to reword this…. Thanks
for the meal!! But yeah, thanx for spending some time to talk about
this issue here on your website.
I am sure this piece of writing has touched all the internet users, its really really fastidious paragraph on building up new web
site.
Nice post. I used to be checking constantly this weblog and I
am impressed! Extremely useful information specifically the last phase
🙂 I deal with such information a lot. I used to be seeking this
particular info for a long time. Thank you and best of luck.
Hello, after reading this amazing piece of writing i am too glad
to share my know-how here with friends.
Hi friends, how is everything, and what you want to say on the topic
of this paragraph, in my view its in fact remarkable designed for me.
First off I would like to say great blog! I had
a quick question that I’d like to ask if you don’t mind.
I was interested to know how you center yourself and clear your thoughts prior to writing.
I have had trouble clearing my mind in getting my thoughts out there.
I truly do take pleasure in writing but it just seems like the first 10 to 15 minutes are lost
simply just trying to figure out how to begin. Any recommendations or tips?
Kudos!
You have made some decent points there. I checked on the net to find out more about the issue and found most
individuals will go along with your views on this site.
I really like reading a post that will make people think.
Also, thank you for allowing for me to comment!
It’s a shame you don’t have a donate button! I’d definitely donate to this fantastic blog!
I suppose for now i’ll settle for bookmarking and adding
your RSS feed to my Google account. I look forward to fresh updates and will share this site with my Facebook group.
Talk soon!
That is a great tip particularly to those fresh to the blogosphere.
Brief but very precise information… Thanks for sharing this one.
A must read post!
Aw, this was a really good post. Spending some time
and actual effort to generate a very good article… but what can I say…
I hesitate a whole lot and never manage to get anything done.
Wow that was unusual. I just wrote an incredibly long comment but after I clicked submit my comment didn’t appear.
Grrrr… well I’m not writing all that over again. Anyway, just wanted to say
wonderful blog!
Excellent post. I certainly love this website. Keep it up!
Wow, amazing blog layout! How long have you been blogging for?
you made blogging look easy. The overall look of
your site is magnificent, let alone the content!
I really like it whenever people come together and share thoughts.
Great blog, continue the good work!
Spot on with this write-up, I seriously feel this amazing site needs a lot more attention. I’ll
probably be back again to read through more, thanks for the advice!
I used to be recommended this web site through my cousin. I’m no longer sure whether or not this publish is written via him
as no one else understand such unique about my problem.
You are amazing! Thanks!
wonderful submit, very informative. I ponder why the opposite specialists of this sector do not
realize this. You should continue your writing.
I’m sure, you’ve a great readers’ base already!